Production line for Corner Bead Profiles


Corner beads /Angle beads are used on the corner of walls. Angle beads inside the plaster on corners enable rigidity, straightness and long lifetime for Wall corners.

  • Expanded mesh angle beads
  • Corner beads with perforated holes
  • Corner beads with square holes
  • Depth gauge profiles
  • Corner profiles made from Aluminum- Galvanized iron –Stainless Steel


  • Capacity: 1250t
  • Coil width: 97 mm (max.)
  • Motorized (0,75kW)
  • Double head as optional


  • Capacity: 35t
  • Electric Power: 5,5kW
  • Type: H
  • STRUCTURE: Steel welded construction, Stress relief treatment after welding, precisely machined sliding surface on the body and ram surfaces
  • Pneumatic clutch engaged
  • One-piece table from steel welded construction, machined and painted
  • SLIDEWAYS: Ball screws between body and ram table surfaces (8 mating surfaces)


  • Production Speed: 24-85 m/min. (according to the profile type)
  • Shaft diameter: 40mm
  • Number of forming stations: depends on profile type (6-13 stations)
  • One-piece table from steel welded construction, machined and painted
  • Steel roller shafts, entirely hardened and ground
  • Shafts supported on both ends
  • Adjustable stand (operator side) and fixed stand (drive side)
  • Upper roller shafts adjustable according to the thickness to be worked, with graded Vernier scale for setting.
  • Rollers for forming and calibration made of S 4140 alloy steel precisely machined and heat treated at 55-57 HRC and re-machined after hardening for long lifetime


  • Type: Stop type shear
  • Hydraulic system
  • The cutting die set is made from cold work tool steel S1.2379 which is precisely machined, hardened to HRC60-62, wire erosion cut and grinded.
Diğer Ürünler